If you love making homemade Christmas gifts or just want to add a little holiday spirit to your bath routine, these Christmas tree bath bombs are a fun project to try!
I used pine essential oil because I wanted them to actually smell like Christmas trees, and I think the green color and little tree shapes turned out so cute. They’re also pretty simple to make, although getting the right consistency takes a little patience.
These would be adorable as stocking stuffers, part of a homemade Christmas gift basket, or just something to keep for yourself.

Christmas Bath Bombs Recipe
Yield: About 5 bath bombs, depending on the size of your mold.
Ingredients
- ½ cup baking soda
- ¼ cup citric acid
- ¼ cup Epsom salt
- ¼ cup cornstarch
- ½ teaspoon almond oil
- 8 drops pine essential oil
- Spray bottle with water
- Green bath-safe mica powder
- Christmas tree silicone mold

Instructions
Step 1: Mix the Oils
Start by adding the pine essential oil to the almond oil and mixing them together. This will help distribute the essential oil throughout the bath bombs.

Step 2: Combine the Dry Ingredients
In a large bowl, mix together the baking soda, citric acid, Epsom salt, and cornstarch. Stir everything until it’s well combined and there aren’t any big clumps.

Step 3: Add the Oil Mixture
Slowly add the almond oil mixture to your dry ingredients, stirring as you go. Keep mixing until everything is evenly combined.

Step 4: Add Some Christmas Color
Add a little green mica powder and stir until you get the color you want. I wanted mine to look like little Christmas trees, but you can make them as light or dark green as you like.
Want to save this for later?


Step 5: Get the Right Consistency
This is probably the trickiest part of making bath bombs!
Using a spray bottle, lightly spray the mixture with water while stirring. You want it to feel like damp sand that holds together when you squeeze it.
I ended up using around 12 sprays, but you might need a little more or less.

Just be careful not to add too much water. If the mixture gets too wet, it can start fizzing before you even put it in the molds.
Step 6: Fill the Molds
Once the mixture holds together, press it firmly into your Christmas tree silicone molds.

Make sure to pack it in well so the bath bombs don’t fall apart when you remove them.
Let them sit for about 24 hours, or until they’re completely hard.

Step 7: Unmold Your Bath Bombs
Once they’re dry, carefully pop them out of the molds. I recommend going slowly, especially around the little branches of the Christmas trees.



And that’s it! Your Christmas tree bath bombs are ready to use.
Notes
- You don’t have to use pine essential oil. Feel free to switch it out for another skin-safe essential oil you like.
- Add the water slowly. It’s much easier to add a few extra sprays than to fix a mixture that’s too wet.
- Make sure your mica powder is bath-safe, since some types can stain the bathtub.
- Store your bath bombs in an airtight container to keep moisture out.

Christmas Tree Bath Bombs
Ingredients
- ½ cup baking soda
- ¼ cup citric acid
- ¼ cup Epsom salt
- ¼ cup corn starch
- ½ teaspoon almond oil
- 8 drops Pine essential oil
- Spray bottle with water
- Green mica powder
- Christmas tree silicone mold
Instructions
- Add the essential oils to the almond oil.
- Mix the baking soda, citric acid, Epsom salt, and corn starch in a large bowl.
- Slowly add in the almond oil. Stir to combine.
- Add in the mica powder and stir until you get your desired color.
- Finally, spray the mixture with water until it gets to a moldable sand consistency. (I did around 12 sprays). You don’t want it too wet, but don’t want it too dry either.
- Fill in the molds and wait 24 hours or until it is hard like a rock.
- Slowly unmold and enjoy!
Notes
- You can use any type of essential oil you want.